How to Fix “Stop Error Code 0x0000007b” in Windows 7 & 10 2020


It is very annoying to meet this stop error 0x0000007b when you boot your computer, and this error often accompanies the blue screen of death.

Are you worried about “Blue Screen Stop Error Code 0x0000007b“? This post is for you to correct such mistakes quickly. Sometimes, users encounter a situation where the system screen turns blue and shows an error message to restart. Here in this guide, we will discuss the 0x0000007B stop error in Windows and ways to overcome this situation.

Suddenly, a blue screen appears on your Windows computer, and you see this error code: 0x0000007B. You must be very angry and frustrated. Don’t worry In general, this is an easy problem to fix. Stop 0x0000007B errors are caused by device driver issues (especially regarding hard drives and other storage controllers), viruses, data corruption, and sometimes hardware failures.

STOP 0x0000007B Error will always appear on a stop message, commonly called a blue screen of death.

What is Stop Error Code 0x0000007b?

A technical person also interprets this error as a stop error or BSOD. Typically, users encounter these errors when the Windows operating system does not fully boot. Sometimes due to various internal errors in your system hardware or hardware drivers. So, keep reading this blog to fix Windows Stop 0x000007b errors. But before we discuss these methods, let’s take a look at the error and its causes at the bottom of the blog.

Reasons Behind “Stop Error Code 0x0000007b?

This blue screen stop error code 0x0000007b appears due to an incorrect copy of the mirrored partition on your system. There is also an error in the screen as FTDISK_INTERNAL_ERROR. The system encounters this error when users install or launch new hardware or software.

The INACCESSIBLE_BOOT_DEVICE issue is also known as the Stop 0x0000007B error. Checks to see if Windows can’t access system distribution during startup. The BSOD incapable boot device issue occurs after a Windows update or update or after reinstalling Windows 10 (or Windows 8). In other cases, an uncertain boot device issue may occur after upgrading Windows 7 to Windows 10 or due to incorrect BIOS settings, a bad file system, or a bad hard disk drive. Let’s see the major reasons behind this stop error code 0x0000007b in windows 7.

  1. Corruption in memories.
  2. The hard disk is broken.
  3. System files damaged.
  4. Virus or malware corruption.
  5. Corrupt Windows registry.
  6. Outdated or damaged device drivers.
  7. Incorrectly configured device drivers.
  8. Driver conflict due to new hardware installation.
  9. Due to bad or bad memory.
  10. If the hard disk is corrupt.
  11. Due to bad files.
  12. Risk of viruses or malware.
  13. Corruption Windows Registry.
  14. Due to old or faulty drivers.
  15. Improper configuration of device drivers.
  16. If there is a driver friction problem due to newly installed hardware.

You May Also Know: How to Fix “No Internet, Secured” Error Message in Windows 10

7 Ways to resolve “Blue Screen Stop Error 0x0000007b in Windows 7

how to fix blue screen stop error code 0x0000007b

Since there are different reasons for the error, there may be different solutions to correct the error. Let’s discuss the most used and easiest solution to fix BSOD error.

Method 1: Perform the System Comprehensive Scan

In general, malware infection is the most common cause of FTDISK_INTERNAL_ERROR. Therefore, to eliminate the effects of viruses or malware, run a full scan of the system using a reliable anti-malware program.

Method 2: Restart Your PC

When you encounter a stop error code 0x0000007B, a message appears on the screen: “If you have seen this stop error screen for the first time, restart your computer.” Therefore, restarting your computer may save you from error.

Sometimes, error 0x0000007B maybe just a bug so that your computer does not boot properly. This way, you reboot your PC and allow it to boot properly. But if that doesn’t work, you can try the following methods.

Method 3: Remove System Junk

When this results in overloaded junk files on the system, the Windows result is static or slow. And that’s why FTDISK_INTERNAL_ERROR throws out the error. Therefore, it is important to clear the junk files which will help you to resolve the error. And the efficiency of the system will be increased. You can clean up junk files using Windows Disk Cleanup (CleanMager). And to do that you just have to go through the following steps:

  1. Access the Start button on your computer.
  2. Then type the command in the search tab and select the command prompt.
  3. Click on CTRL + Shift keys and press Enter.
  4. Tap Yes on the Display Permissions popup.
  5. Now press the cursor, key in Kleinmager, and Enter to flick the black box.
  6. Select the drive required to clear and press OK.
  7. Wait until Disk Cleanup calculates the amount of disk space to reclaim.
  8. Now check the category boxes that need to be cleared.
  9. Finally fine.
Method 4: Update all the available device drivers

This error can also be caused by old or incorrect drivers. You need to verify that all your devices have the correct drivers and update those that do not. If you don’t feel comfortable playing with drivers manually, you can do this automatically through Driver Easy.

Driver Easy will automatically recognize your system and find the right driver for it. You don’t need to know exactly what system your computer is running, you don’t have to risk downloading and installing the wrong driver, and you don’t have to worry about making mistakes when installing. not required. You can automatically update your drivers from the free or pro version of Driver Easy.

  • Restart your computer to boot into Windows.
  • Download and install Easy Driver.
  • Easily run the driver and click scan. Driver Easy will then scan your computer and detect any troublesome drivers.
  • Click the Update button with any flagship driver to automatically download and install the correct version of these drivers (you can do this with the free version).
  • Or click to automatically download and install the correct version of all drivers on your system (this requires the Pro version – a hint to upgrade when you click Update All Will be done).
  • Reboot your Windows 10 and check if it still shows the blue screen.
Method 5: Change your SATA Operation

Sometimes, a 0x0000007B stop error can be caused by a boot sector problem. Try changing your SATA operation to resolve your issue:

  1. Restart your computer and press F2 constantly.
  2. Then boot your computer into the BIOS. Then press the arrow keys to select Esta Operation> ATA.
  3. Press Enter on your keyboard.
  4. Click Yes when you save changes.
  5. Press F10 constantly on your keyboard until the following window pops up; Then click Yes.
  6. Press Enter and wait for your computer to boot into Windows.
  7. Check to see if your windows still show a blue screen.
Method 6: Run the System Restore

If you have created a system restore point, then you can run System Restore to get rid of the 0x0000007B error. System Restore is a powerful utility for Windows that allows you to undo some changes to your computer and return to a previous normal state.

Method 7: Reconfigure the latest System Changes

Windows offers you an active utility, i.e system restore. This utility allows its users to “go back in time”. This helps you to troubleshoot potential troubleshooting times to resolve the FTDISK INTERNAL_ERROR error. Take the following steps:

  1. Go to Start on your PC.
  2. In the search box, select the option to type, restore the system, and then create a restore point.
  3. Press Enter.
  4. Tap System Restore.
  5. Then at the command prompt, enter the administrator password
  6. Now follow the wizard instructions to select the restore point.
  7. And finally, restore the PC.

Wrapping Up

So here in this post, we discussed how to fix the blue screen STOP error code 0x0000007b. Hopefully this guide will be helpful to you and will solve the mistake successfully.

Leave a Comment